Features
- Equipped with the HAWE ePrAX® hybrid pump control system, this hybrid bending machine enhances performance by 30% through reduced cycle time (shorter ramp-up time), saves 70% energy, 80% hydraulic oil, and reduces noise by 15%.
- No hydraulic piping connections are required, significantly lowering the hydraulic system failure rate.
- Achieves 5μm positioning accuracy.
- Offers a standard maintenance cycle of 7,000 working hours.
- Features full worktable compensation, with compensation wedges that better match the actual deformation curve of the machine, ensuring improved overall angle and straightness of the workpiece.
- Convenient tooling loading and unloading: tooling can be side-loaded or vertically installed and removed by pressing the red point, with the added functionality of tooling locking.
- Provides real-time feedback on slider position, ensuring precise bending angles.
Parameters
| Model |
|
|
|
| Energy saving | 60-70% | 30-40% | 0 |
| Hydraulic oil saving | 70-85% | 0 | 0 |
| Speed increasing | 130% | 100% | 100% |
| Main motor | Servo motor * 2 | Servo motor * 1 | Electric motor * 1 |
| Oil pipe connection | No need | Need | Need |
| Aging time of hydraulic parts | Very slow | Slow | Normal |
| Noise level | Very low | Low | Normal |
Related Products
-
- Email: sales@dardiwaterjet.com
- Contact: Mr. Gao
- Mobile: +86-18851630918
-
Products
-
Waterjet Cutting Solution
-
Waterjet Cutting System Part